Mitch's Awesome Cut List Optimizer

Enter the size of your sheet and the pieces you need, then click Generate. The tool arranges the pieces to waste as little material as possible, using only straight cuts that run all the way across, so every layout can be cut with a track saw. Dimensions are in inches: 23-5/8, 23 5/8 and 23.625, all work. If the factory edges need trimming, enter the trimmed sheet size.

Sheet size

Length × Width

Grain direction Along the length Along the width None (MDF, melamine, hardboard)

Pieces

Check Grain if a piece’s length has to run with the grain; otherwise the tool may turn it 90° to fit better. Quantity defaults to 1. Press Enter to move to the next row. All cuts allow for a 1/8″ saw kerf.

← Back to tools | Back to Home